RS9317N intelligent speed monitoring protection transmitter for rotating machinery speed monitoring/protection, users can configure alarm value, number of teeth. The speed adjuster adopts high brightness OLED screen display, with full function and measuring accuracy of 0.01r/min. It can be connected to eddy current sensor, passive magnetoelectric sensor, active magnetoelectric sensor to measure the speed and convert the speed signal to the standard analog signal of 4 ~ 20mA (or 1 ~ 5V). It can be directly connected to PLC, DCS system or other fault diagnosis system. It can set the range, alarm value and working state of relay by touch configuration, USB interface configuration and network port configuration, and can view alarm memory query, bar chart display, trend chart, data list, page turning query and other functions on the transmitter in real time.

 Matching sensor

■ Eddy current sensor

■ Passive magnetoelectric sensor

■ active magnetoelectric sensor

  Technical specification

■RS9317+24VDC power supply;

■ Full isolation technology of input and output signals;

■ the measurement accuracy can be as low as 0.2Hz;

■ Speed alarm memory query function;

■ Sensor power supply:

-24v 1v (the current limit of the eddy current sensor is 30mA to prevent ignition).

+24v 1v (powered by active magnetoelectric sensor);

■ Diagnostic signal: BNC connector or terminal BUF output;

■ Output mode: 4 ~ 20ma (maximum load 500ω) or 1 ~ 5vdc;

■ set the number of teeth of any simulated gear disc within the range of 1 ~ 255;

■ communication configuration between■MiniUSB and PC;

■ Press and hold the reset button to display the speed range, tooth number and alarm value;

■ Real-time condition monitoring function of upper computer, displaying data waveform, bar chart and alarm information in real time;

■ Working voltage: 24VDC.