Product Classification
Sensor / Transmitter Technology
Safety condition monitoring and protection instrument device
Automatic wireless control technology condition verification and calibration instrument
Rotating equipment fault diagnosis and analysis system
Wind turbine condition monitoring system
RS9218 configuration displacement monitoring protection instrument
Your location:> Home> Products> Single-Channel Monitoring and Protection Instrument Device and Transmitter> RS9218 configuration displacement monitoring protection instrument
RS9218 configuration displacement monitoring protection instrument

■ Positive and negative alarm monitoring function;

■ Axis displacement alarm/danger value memory query;

■ Upper configuration/display software, can be configured to set the range, approach direction, zero installation position;

■ Working voltage :110V ~ 260VAC.


Details

The RS9218 configuration displacement monitor is a highly reliable intelligent monitoring instrument for axial displacement and differential expansion. RS9218 configuration displacement monitor The user can configure the displacement/expansion according to the need, can set the monitoring range, alarm mode, relay working mode and direction of travel in the upper computer, and record the real-time displacement in the monitoring data interface. The monitor input uses a common mode suppression circuit, strong anti-interference performance, to ensure that the input signal is real and effective, and to isolate the output from 4 to 20mA (or 1 to 5V), effectively reducing the interference caused by long-distance transmission. It can be widely used in the field of large rotating machinery involving the monitoring and protection of axial displacement and expansion state.


Main functions and benefits

■ Full isolation of input and output signals;

■ Equipped with sensors :5mm/8mm/1mm/16mm eddy current sensor;

■ Positive and negative alarm monitoring function;

■ Axis displacement alarm/danger value memory query;

■ Upper configuration/display software, can be configured to set the range, approach direction, zero installation position;

■ Sensor power supply:

-24V±1V(eddy current sensor power supply limit 30mA, prevent ignition);

■ Diagnostic signal: terminal BUF output;

■ Output mode :4~20mA(maximum load 500) or 1~5VDC;

■MiniUSB communication mode and configuration Settings;

■ Working voltage :110V~260VAC.


X
Shanghai Ruishi Instrument Electronics Co., Ltd.
Scan QR code
follow Ruishi
Contact us

Headquarters address:No.118, Building 54, Lane 255, Sizhuan South Road, Songjiang District, Shanghai (Famous Enterprise Mansion)

Sales hotline:021-67871955/54425984

Fax:021-54865118

Zip code:201612

Person in charge:13601921246

Mailbox:13601921246@163.com

Website Support | Nuoqi Science& Technology Co., Ltd. All rights reserved 沪ICP备18029944号-1